April 22, 2020
Recordings of the Webinars Series
Webinar "Basic Capabilities for Uncertainty Quantification"
The recording of the webinar #5 of pSeven Intro Webinars series held on April 6, 2022.
Increase product robustness: learn how to assess the influence of uncertain parameters of a product on its' characteristics with Uncertainty Quantification (UQ) capabilities.
Specialists from a wide spectrum of industries face the need to evaluate the influence of uncertain parameters of a product, like material properties or operating conditions, on its technical and operational characteristics. Uncertainty Quantification (UQ) in pSeven addresses this need and allows engineers to significantly improve quality and reliability of designed products and manage potential risks at early design, manufacturing and operating stages. UQ is used to assess model design point taking into account all possible deviations of input parameters and their influence on the output.
In this webinar, you will learn about pSeven tools to efficiently quantify and deal with uncertainties in design variables and responses:
- Manual selection of input distribution types
- Automatic fitting of input and output samples to the available distribution type
- Creating non-parametric distributions
To estimate the outputs probability of distribution under uncertain inputs or evaluate the probability of violation for given constraints.
Webinar "Getting Started with Predictive Modeling"
The recording of the webinar #4 of pSeven Intro Webinars series held on March 30, 2022.
Predictive Modeling is based on building, managing and evaluating predictive models that are also often called approximation models, response surface models (RSM), reduced order models (ROM), surrogate models, metamodels etc. Predictive models are used for predicting function’s response values or behavior of the product designs without running new simulations and full-scale experiments.
pSeven provides full set of tools to train the data on external datasets and data, coming from simulation workflows, validate and compare your models, visualize them and export to neutral formats, like FMI.
Smartselection feature allows to train the models in one click and ensure the technique and its settings fits your problem best, even if you are not an ML expert.
In this webinar, we demonstrated predictive modelling capabilities available in pSeven. Join and learn how to predict response values for new designs, accelerate complex simulations and capture knowledge from vast amounts of data with automatic and adaptive technique choosing.
Webinar "Basic Capabilities of Postprocessing in pSeven"
The recording of the webinar #3 of pSeven Intro Webinars series held on March 23, 2022.
Better understand your product and make better design decisions.
pSeven provides full control over external data and rich post-processing capabilities. In this webinar, DATADVANCE showed how to visualize and reuse engineering results with a comprehensive set of interactive and customizable tools, including all kinds of tables and statistics, correlations, dependencies, parallel coordinates and 2D/3D visualization. Linked selection feature allows you to track the impact of your selections and filtering across all the data sample and extract the subsamples of interest after interactive exploration.
Webinar "Getting Started with Parametric Optimization"
The recording of the webinar #2 of pSeven Intro Webinars series held on March 16, 2022.
Parametric optimization applies to any engineering domain. Optimization is a process of finding the values of input parameters, which lead to the best performance of analytical or simulation model of a product or a manufacturing process under investigation. Ultimately, it answers the following questions:
- How to improve product or process characteristics under constraints?
- Which combination of input parameters is the best?
- How to reduce the number of expensive calculations or even the real tests?
In this webinar, we demonstrated the capabilities of pSeven to efficiently setup and solve design optimization problems with a complete set of in-house developed methods and algorithms.
Webinar "Getting started with direct integration of CAD/CAE tools with pSeven"
The recording of the webinar #1 of pSeven Intro Webinars series held on March 9, 2022.Integrate all your CAD/CAE packages into a single workflow, explore virtual prototype behavior and eliminate repetitive tasks with automation.
pSeven is a platform that allows to capture even the most complex design processes by integrating external tools, CAD/CAE software and data you are using into a single workflow, define its logic and collect, analyze and reuse engineering data.
Batch mode integration enables the automation of almost any external tool on the market and direct integration blocks allow to incorporate CAD and CAE models into your workflow with only a few clicks. And User block feature provides all the means to develop your own integration blocks from generic templates.
Webinar "CFD-Driven Optimization of an Industrial-Grade Compressor from Your Web Browser with Datadvance"
The recording of a joint webinar with SimScale, held on February 8, 2022.
In this webinar experts from SimScale and Datadvance present a scalable, cloud-integrated workflow for fully automated optimization studies. Learn how connecting Datadvance’s cloud-native low code platform pSeven Enterprise to SimScale’s multiphysics cloud simulation engine using API allows a drastic speedup of simulation and optimization procedures.
As an example, an air compressor model is optimized for efficiency by changing geometric parameters of blades profiles while keeping the initial operational model, i.e. the same pressure drop. By simulating over 100 iterations, the new workflow makes optimization a quick, cost-efficient procedure. Datadvance and SimScale make advanced design exploration accessible to engineers across teams, departments, and regions.
Webinar "Introduction to Design Exploration and Predictive Modelling capabilities of pSeven"
The recording of the webinar held on April 8, 2020.Learn the basics about an intuitive and easy to use set of functionalities available in pSeven, software platform for design space exploration and predictive modeling by Datadvance.
Questions answered during the webinar:- How to automate complex product development processes and eliminate repetitive tasks.
- How to optimize product design just in a few clicks.
- What is SmartSelection and how it allows any user with no specific competence to build predictive (surrogate) models or to optimize his designs in the shortest term. We prepared a demo to show you how SmartSelection automatically chooses the most efficient design exploration or predictive modeling technique for a given type of problem and data.
- How to visualize the results of various optimization and simulation processes and analyze them with minimum effort
Webinar "Design of Experiments and Optimization in pSeven"
The recording of a second webinar of the series, held on April 15, 2020.
This webinar describes:- the use of Design Space Exploration (DSX) block and a range of techniques available in pSeven to perform Design of Experiments studies. The generation of data sample using Design Exploration in pSeven will be displayed in a demo case.
- the use the Design Space Exploration (DSX) block to perform Optimization studies in pSeven.
- setting up hints about the problem for SmartSelection technique to choose the most suiltable Design Exploration technique automatically.
Webinar "Predictive Modelling Capabilities in pSeven"
The recording of a webinar held on April 22, 2020
The third webinar of a series is covering the functionalities of pSeven to build, validate and export predictive models. Webinar describes how to:
- Build and manage predictive models using a set of tools available in pSeven, that can work with both data gathered from automated simulation workflows in pSeven and datasets imported from CSV or Excel files.
- Create a predictive model step by step using Model builder tool in pSeven Analyze.
- Check the accuracy of predictive model and to compare several models.
Webinar "pSeven Enterprise – AI-powered Cloud Solution to Collaboratively Design the Best Products Faster"
The recording of a webinar held on May 27, 2020
Webinar introducing pSeven Enterprise ― a true cloud solution that democratizes design optimization and predictive analytics technologies to enable engineers collaboratively design the best products faster.
pSeven Enterprise comprises and extends the functionalities of pSeven ― software platform for engineering process automation, design optimization and predictive analytics. Webinar attendees will discover the benefits of using pSeven Enterprise: easy access and scalability, improved collaboration, functionality extension with open APIs, technology democratization with publishing workflow-powered web applications to AppsHub gallery and more!
Webinar "Design and Shape Optimization of a Wind Turbine Blade"
The recording of a webinar held on June 3, 2020
Shape optimization in the context of CFD analysis of different products is one of the most important tasks in industry and relates to different application areas as aviation and space, automotive, shipbuilding and wind power.
This webinar is a demonstration of a real engineering example of optimization in the field of wind power industry. Liubov Lavrishcheva, Head of Flypoint Parametrica and Project Manager at Krylov State Research Centre, presents the design and 3D shape optimization of a wind turbine blade with a rated power of 3,45 MW.
Recording of the Webinar: Using pSeven for Optimization of the Ion Engine and Hydrogen Fuel Cells
The recording of a webinar held on November 24, 2020
This webinar will bring you up to speed on two case studies performed with the use of pSeven by Skolkovo Institute of Science and Technology (Skoltech) for its customers.
Mikhail Gusev, Research Scientist at the Center for Design, Manufacturing, and Materials within Skoltech, will demonstrate the cases. The first one is the ion engine modeling and optimization of its' design parameters. The second case study describes a shape optimization of the hydrogen fuel cells.
Recording of the Webinar: "ANSA and META interaction with pSeven: benefits of optimization with parametric mesh morphing"
The recording of a webinar held on February 10, 2021
Watch the recording of the joint webinar by BETA CAE Systems and DATADVANCE to discover the benefits of parametric mesh morphing in optimization studies compared to the typical CAD-based parameterization of geometry modifications.
Advantages of morphing in ANSA preprocessor by BETA CAE Systems and optimization problem solution in pSeven platfrom by DATADVANCE are shown at an example of optimizing mass of a front axle beam of a bus with 8 geometry parameters, stress and displacement constraints.
A live demo of the test problem solution includes a detailed demonstration of each step.
Recording of the Webinar: Integrate any Engineering Software Easily with a New Configurable User Block
The webinar was held on 26 May, 2021
pSeven offers engineers several methods to integrate any CAD/CAE software packages their company use into a single workflow and to eliminate exhaustive repetitive tasks by automating file and data exchange between them. This webinar is dedicated to the main features and capabilities of the User Block in pSeven ― a new integration method released in the 6.17 version.
User block allows user to combine the advantages of two previous integration ways: convenient configuration of direct integration with an interface between a pSeven workflow and a software and a great flexibility of generic integration.
Recording of the Webinar: Virtual Optimization of Suspension Parameters using Adams Car and pSeven
The webinar was held on 16 June, 2021
Benefits of integration between Adams Car by MSC Software, part of Hexagon's Manufacturing Intelligence division, and DATADVANCE’s pSeven software platform are demonstrated via an industrial use-case involving the optimization of an automotive suspension damper.